Access Control Processing and Host Interface for Two Readers/Doors
The HID VertX products provide a complete and fully featured
hardware/firmware infrastructure for OEM access control
software host systems, communicating via industry standard
TCP/IP protocol, over 10/100 Mbps Ethernet, or the Internet. It
can also interface with a Windows DLL. The V2000 boasts a 32bit RISC processor running the Linux Operating System. Onboard flash memory allows program updates to be
downloaded via the network. The V2000 connects to two
access control card readers via Wiegand or Clock-and-Data
interface controlling either one or two doors. This architecture
takes advantage of the existing corporate LAN and the existing
CAT-5 cable.
Features
? Connects with and stores a complete access control and
configuration database for one or two controlled doors
and 44,000 cardholders with expansion capability to
250,000 cardholders.
? Processes access control decisions.
? Reports supervised inputs/alarms with 255 priorities.
? Includes an HTTP API, Windows® DLL-based
API, and a direct communication API.
? Allows local connection of a laptop
computer for diagnostics and configuration.
? Connects to the host and to other devices
on the TCP/IP network.
? Receives and processes real time
commands from the host software
application.
? Reports all activity to the host
? Controls and communicates with all
connected devices.
? Buffers offline transactions and uploads to
the host when communication is restored.
? UL 294 and UL 1076 recognized
components.
Optional VertX
Memory Upgrade:
16 or 32 MB
.55 mm)
4.825? (122
5.8? (147.32 mm)
VertX? V2000 2-Door Access Control /Network Interface Unit
Features
Specifications
Configuration
Attractive polycarbonate enclosure protects components
from damage and all connections and indicators are fully
identified by silk-screened nomenclature on the cover.
Dimensions
5.8? W x 4.825? H x 1.275? D
(147.32 mm x 122.55 mm x 32.38 mm)
Weight: 13.6 oz (.38 kg)
Mounting
Mount to any wall surface, using four screws. For UL
compliance, one or more gateways can be mounted inside
a locking customer-supplied NEMA-4 rated enclosure with:
? DC supply with battery back-up
? Enclosure tamper switch
? All connections made through conduit
The unit should be installed indoors, inside a secure area,
such as in an IT or telecommunications room, utility closet
or on a wall above a suspended ceiling.
Visual Indicators
Power LED indicates that sufficient DC voltage is being
provided to the unit. RS-485 communications LED: solid
green indicates successful communications to
downstream devices, red flash indicates a failed
communications attempt, solid red indicates no
communications.
Easily Interfaced
? RJ-45 connector for Ethernet TCP/IP
? Quick-disconnect screw terminal connectors
? Inputs for:
? 2 readers
? 2 door monitor switches,
? 2 Request-to-Exit switches
? AC Fail Monitor*
? Battery Fail Monitor*
? Enclosure Tamper*
*Can be configured as a general purpose input
Non-latching relay outputs rated 2 A @ 30 VDC
? 2 door strikes (configurable)
? 2 auxiliary devices: (door held/forced alarm, alarm
shunt, host offline (comms down),or general purpose
Hardware
? 32-bit RISC CPU, 100 MHz
? Microcontroller
Memory
? 8 MB onboard Flash memory
? 16 MB / 32 MB memory expansions available
? 32 MB SDRAM
? 256K SRAM
Enclosure Material: UL94 Polycarbonate
Power Supply Requirements
160 mA @ 12-18 VDC (with no readers connected)
Recommended: Supervised linear power supply with
battery backup, input surge protection, and AC Fail and
battery low contact outputs. V2000 can supply
350 mA @ 12 VDC to two connected readers.
Separate supervised DC supply with battery back-up
recommended for door locking or relay activated devices
or for HID MaxiProx readers.
Operating Environment
Indoors or customer supplied NEMA-4 rated enclosure
Temperature
32° to 122° F (0° to 50° C)
Humidity
5% to 95% relative, non-condensing
Communication Ports
TCP/IP ? 10 or 100 Mbps
SIA standard Wiegand/clock and data ? two ports
Certifications
UL 294 and UL 1076 Recognized Component for the US
CSA 205 for Canada
FCC Class A Verification
EMC for Canada, EU (CE Mark), Australia (C-Tick Mark),
New Zealand, Japan
Cable Distance
TCP/IP ? 300 feet (100 m) to next device using Category 5
cable, Alpha 9504C or 9405F
Wiegand ? 500 feet (150 m) to reader using ALPHA 1299C,
22AWG, 9-conductor, stranded, overall shield. (Fewer
conductors needed if all control lines are not used)
Input Circuits ? 500 feet (150 m), 2-conductor, shielded,
using ALPHA 1292C (22AWG) or Alpha 2421C (18AWG)
Output Circuits ? 500 feet (150 m), 2-conductor, using
ALPHA 1172C (22AWG) or Alpha 1897C (18AWG)
Minimum wire gauge depends on cable length
and current requirements.
Warranty
Warranted against defects in materials and workmanship
for 18 months. (See complete warranty policy for details.)
Part Numbers
Base Part Number: 72000
www.hidcorp.com
Specifications subject to change without notice.
